In this clip you will see how to cut 2 drop out molds from 1 squft. of Kaiser Lee Board. You will find more project ideas @ www.kaiserlee.com

Master Lee Breaking two boards each with a reverse punch, an elbow strike, a heel thrust kick, and a backfist

Sara lee, board of directors, intensive learning, ceco08, frupo a

Shows the leeboard hold down I added since the first day on the water. Very simple and it works. But will it work at 20 knots?

Grandmaster Lee breaking two boards with a double-jump spinhook

Ben Lee saying hi to the gorgeous people on the ben lee board. Saturday 4th August 2007 in Sydney at Warringah Mall.

How to test your glass for compatibility for your fused glass project

http://www.sbmchina.com This jaw crusher machine uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.

Laurent shunting the boat. The shunt starts at about :25 and is done at about 1:05. It's a bit slower than it should be since he still had to move the leeboard by hand, I have to fix that.

this is a vid of some scary pics

Joris sails his home-built red-cedar canoe with experimental "sticks and strings" - rig on 2nd easter day 2007 in Wormer, the Netherlands

Hardwood cockpit combing finished. Discussion about floor stiffeners, fitting brackets for seat back rests, painting to improve longevity, making heavier duty gudgeons, request for rudder & leeboard info., and proposed luff groove method of manufacture.

UTA Adult Breaking Competition.

Joris sails his home-built red-cedar canoe with experimental "sticks and strings" - rig on 2nd easter day 2007 in Wormer, the Netherlands

board sliding

This is my scrolling board.I have added serial input using visual basic programming.The required text is typed on the visual basic interface and transmited serially to the board .Then the newly typed message will be displayed on the board.I took this video with my phone thus little low in quality but it shows Hello World! typed in the interface and being transmitted to the board.

Bruce Lee on Hong Kong TV 1969

A 12 Character LED scrolling Text,sign display board which I made recently.This my 2nd project of this nature.I will add more features to this more fonts and character space.The message is programme via PC's serial port.