Discover

In physics and engineering, the 'time constant' usually denoted by the Greek letter ''$au$'', (tau), characterizes the frequency response of a first-order, linear time-invariant (LTI) system. Examples include electrical RC circuits and RL circuits. It is also used to characterize the frequency response of various signal processing systems – magnetic tapes, radio transmitters and receivers, record cutting and replay equipment, and digital filters – which can be modelled or approximated by first-order LTI systems.
Other examples include time constant used in control systems for integral and derivative action controllers, which are often pneumatic, rather than electrical.
Physically, the time constant represents the time it takes the system's step response to reach approximately 63% of its final (asymptotic) value, ie about 37% below its final value.

Contents

Differential equation

General Solution

Control Engineering

Specific cases

Examples of time constants

Time constants in electrical circuits

Thermal time constant

Time constants in neurobiology

Radioactive half-life

See also

External links

Differential equation

First order LTI systems are characterized by the differential equation
:$$
{dV over dt} = - lpha V ,

where represents the exponential decay constant and ''V'' is a function of time ''t''
:$$
V = V(t) ,

The time constant is related to the exponential decay constant by
:$$
au = { 1 over lpha } ,

General Solution

The general solution to the differential equation is
:$$
V(t) = V_o e^{-lpha t} = V_o e^{-t / au} ,

where
:$$
V_o = V(t=0) ,

is the initial value of ''V''.

Control Engineering

The diagram below depicts the exponential function $y=Ae^\{at\}$ in the specific case where , otherwise referred to as a "decaying" exponential function:

Suppose
:$y=Ae^\{-at\}\; =\; Ae^\{-\{t\; over\; au\}\}$
then
:$au=\{\; 1\; over\; a\}$
The term $au$ (tau) is referred to as the "time constant" and can be used (as in this case) to indicate how rapidly an exponential function decays.
Where:
:t = time (generally always $t>0$ in control engineering)
:A = initial value (see "specific cases" below).

Specific cases

:1). Let $t=0$, hence $y=Ae^0$, and so $y=A$
:2). Let $t=\; au$, hence $y=Ae^\{-1\}$, ≈ 0.37A
:3). Let $y=f(t)=Ae^\{-\{t\; over\; au\}\}$, and so $lim\_\{t\; o\; infty\}f(t)\; =\; 0$
:4). Let $t=5\; au$, hence $y=Ae^\{-5\}$, ≈ 0.0067A
After a period of one time constant the function reaches e^-1 = approximately 37% of its initial value. In case 4, after five time constants the function reaches a value less than 1% of its original. In most cases this 1% threshold is considered sufficient to assume that the function has decayed to zero - Hence in control engineering a stable system is mostly assumed to have settled after five time constants.

Examples of time constants

Time constants in electrical circuits

In an RL circuit, the time constant ''$au$'' (in seconds) is
:$$
au = { L over R } ,

where ''R'' is the resistance (in ohms) and ''L'' is the inductance (in henries).
Similarly, in an RC circuit, the time constant ''$au$'' (in seconds) is:
:$$
au = R C ,

where ''R'' is the resistance (in ohms) and ''C'' is the capacitance (in farads).

Thermal time constant

See discussion page.

Time constants in neurobiology

In an action potential in a neuron, the time constant ''$au$'' is
:$$
au = r_{m} c_{m} ,

where ''r''_m is the resistance across the membrane and ''c''_m is the capacitance of the membrane.
The resistance across the membrane is a function of the number of open ion channels and the capacitance is a function of the properties of the lipid bilayer.
The time constant is used to describe the rise and fall of the action potential, where the rise is described by
:$$
V(t) = V_{max} (1 - e^{-t / au}) ,

and the fall is described by
:$$
V(t) = V_{max} (e^{-t / au}) ,

Where voltage is in millivolts, time is in seconds, and ''$au$'' is in seconds.
V_max is defined as the maximum voltage attained in the action potential, where
:$$
V_{max} = r_{m}I ,

where ''r''_m is the resistance across the membrane and ''I'' is the current flow.
Setting for ''t'' = ''$au$'' for the rise sets ''V''(''t'') equal to 0.63''V''_max. This means that the time constant is the time elapsed after 63% of ''V''_max has been reached.
Setting for ''t'' = ''$au$'' for the fall sets ''V''(''t'') equal to 0.37''V''_max, meaning that the time constant is the time elapsed after it has fallen to 37% of ''V''_max.
The larger a time constant is, the slower the rise or fall of the potential of neuron. A long time constant can result in temporal summation, or the algebraic summation of repeated potentials.

Radioactive half-life

The half-life ''T''_''HL'' of a radioactive isotope is related to the exponential time constant ''$au$'' by
:$$
T_{HL} = au cdot mathrm{ln2} ,

See also

★ RC time constant

★ Cutoff frequency

★ EQ filter

★ Exponential decay

★ Length constant

External links

★ Conversion of time constant τ to cutoff frequency fc and vice versa

★ All about circuits - Voltage and current calculations