'''Radius of curvature''' has specific meaning and
sign convention ''in
optical design''. A spherical
lens or
mirror surface has a
center of curvature located in (''x'', ''y'', ''z'') either along or decentered from the system local
optical axis. The
vertex of the lens surface is located on the local optical axis. The distance from the vertex to the center of curvature is the
radius of curvature of the surface. The sign convention for the optical radius of curvature is as follows:
★ If the vertex lies to the left of the center of curvature, the radius of curvature is positive.
★ If the vertex lies to the right of the center of curvature, the radius of curvature is negative.
Thus when viewing a
biconvex lens from the side, the left surface radius of curvature is positive, and the right surface has a negative radius of curvature.
Note however that ''in areas of optics other than design'', other sign conventions are sometimes used. In particular, many undergraduate physics textbooks use an alternate sign convention in which convex surfaces of lenses are always positive. Care should be taken when using formulas taken from different sources.
Aspheric surfaces
Optical surfaces with non-spherical profiles, such as the surfaces of
aspheric lenses, also have a radius of curvature. These surfaces are typically designed such that their profile is described by the equation
:
where the
optic axis is presumed to lie in the 'z' direction, and
is the ''sag''—the z-component of the
displacement of the surface from the vertex, at distance
from the axis.
is then defined to be the ''radius of curvature'' of the surface. The constant
is the
conic constant, and the coefficients
describe the deviation of the surface from a ''conic surface'' (a surface that is a portion of a
spheroid,
paraboloid, or
hyperboloid).
See also
★
Radius of curvature
★
Radius
★
Base curve radius
★
Cardinal point (optics)
★
Vergence (optics)