Discover

(Redirected from Photonic crystal fibers)
'Photonic-crystal fiber' (PCF), also spelled ''fibre'', is a new class of optical fiber based on the properties of photonic crystals. Because of its ability to confine light in hollow cores or with confinement characteristics not possible in conventional optical fiber, PCF is now finding applications in fiber-optic communications, fiber lasers, nonlinear devices, high-power transmission, highly sensitive gas sensors, and other areas. The term "photonic-crystal fiber" was coined by Philip Russell in 1995-1997 (he states (2003) that the idea dates to unpublished work in 1991), although other terms such as 'microstructured fiber' are also used and the nomenclature in the field is not entirely consistent. More specific categories of PCF include 'photonic-bandgap fiber' (PCFs that confine light by band gap effects), 'holey fiber' (PCFs using air holes in their cross-sections), ''hole-assisted'' fiber (PCFs guiding light by a conventional higher-index core modified by the presence of air holes), and 'Bragg fiber' (photonic-bandgap fiber formed by concentric rings of multilayer film).

In general, such fibers have a cross-section (normally uniform along the fiber length) microstructured from two or more materials, most commonly arranged periodically over much of the cross-section, usually as a "cladding" surrounding a core (or several cores) where light is confined. For example, the fibers first demonstrated by Russell consisted of a hexagonal lattice of air holes in a silica fiber, with a solid (1996) or hollow (1998) core at the center where light is guided. Other arrangements include concentric rings of two or more materials, first proposed as "Bragg fibers" by Yeh and Yariv (1978), a variant of which was recently fabricated by Temelkuran ''et al.'' (2002).
(Note: PCFs and, in particular, Bragg fibers, should not be confused with fiber Bragg gratings, which consist of a periodic refractive index or structural variation along the fiber axis, as opposed to variations in the transverse directions as in PCF. Both PCFs and fiber Bragg gratings employ Bragg diffraction phenomena, albeit in different directions.)
Generally, such fibers are constructed by the same general principles as other optical fibers: first, one constructs a "preform" on the scale of centimeters in size, and then heats the preform and draws it down to a much smaller diameter (often nearly as small as a human hair), shrinking the preform cross section but (usually) maintaining the same features. In this way, kilometers of fiber can be produced from a single preform. Most photonic crystal fiber has been fabricated in silica glass, but other glasses have also been used to obtain particular optical properties (such has high optical non-linearity). There is also a growing interest in making them from polymer, where a wide variety of structures have been explored, including graded index structures, ring structured fibres and hollow core fibers. These polymer fibers have been termed "MPOF", short for microstructured polymer optical fibers (van Eijkelenborg, 2001). A combination of a polymer and a chalcogenide glass was used by Temelkuran ''et al.'' (2002) for 10.6 µm wavelengths (where silica is not transparent).
Photonic crystal fibers can be divided into two modes of operation, according to their mechanism for confinement. Those with a solid core, or a core with a higher average index than the microstructured cladding, can operate on the same index-guiding principle as conventional optical fiber — however, they can have a much higher effective-index contrast between core and cladding, and therefore can have much stronger confinement for applications in nonlinear optical devices, polarization-maintaining fibers, (or they can also be made with much ''lower'' effective index contrast). Alternatively, one can create a "photonic bandgap" fiber, in which the light is confined by a photonic bandgap created by the microstructured cladding — such a bandgap, properly designed, can confine light in a ''lower-index'' core and even a hollow (air) core. Bandgap fibers with hollow cores can potentially circumvent limits imposed by available materials, for example to create fibers that guide light in wavelengths for which transparent materials are not available (because the light is primarily in the air, not in the solid materials). Another potential advantage of a hollow core is that one can dynamically introduce materials into the core, such as a gas that is to be analyzed for the presence of some substance.

Contents

References

External links

References

★ P. St. J. Russell, "Photonic crystal fibers," ''Science'' '299', 358-362 (2003). (Review article.)

★ P. St. J. Russell, "Photonic crystal fibers", ''J. Lightwave. Technol.'', '24' (12), 4729-4749 (2006). (Review article.)

★ F. Zolla, G. Renversez, A. Nicolet, B. Kuhlmey, S. Guenneau, D. Felbacq, "Foundations of Photonic Crystal Fibres" (Imperial College Press, London, 2005). ISBN 1-86094-507-4.

★ Burak Temelkuran, Shandon D. Hart, Gilles Benoit, John D. Joannopoulos, and Yoel Fink, "Wavelength-scalable hollow optical fibres with large photonic bandgaps for CO2 laser transmission", ''Nature'' '420', 650-653 (2002).

★ J. C. Knight, J. Broeng, T. A. Birks and P. St. J. Russell, “Photonic band gap guidance in optical fibers,” Science 282, 1476-1478 (1998).

★ J. C. Knight, T. A. Birks, P. St. J. Russell and D. M. Atkin, “All-silica single-mode fiber with photonic crystal cladding,” ''Opt. Lett.'' '21', 1547-1549 (1996). Erratum, ''ibid'' '22', 484-485 (1997).

★ R. F. Cregan, B. J. Mangan, J. C. Knight, T. A. Birks, P. St.J. Russell, P. J. Roberts, and D. C. Allan, “Single-mode photonic band gap guidance of light in air,” Science, vol. 285, no. 5433, pp. 1537–1539, Sep. 1999.

★ P. J. Roberts, F. Couny, H. Sabert, B. J. Mangan, D. P. Williams, L. Farr, M. W. Mason, A. Tomlinson, T. A. Birks, J. C. Knight, and P. St.J. Russell, “Ultimate low loss of hollow-core photonic crystal fibers,” Opt. Express, vol. 13, no. 1, pp. 236–244, 2005.

★ P. Yeh, A. Yariv, and E. Marom, “Theory of Bragg fiber,” ''J. Opt. Soc. Am.'' '68', 1196–1201 (1978).

★ A. Bjarklev, J. Broeng, and A. S. Bjarklev, "Photonic crystal fibres" (Kluwer Academic Publishers, Boston, MA, 2003). ISBN 1-4020-7610-X.

★ Martijn A. van Eijkelenborg, Maryanne C. J. Large, Alexander Argyros, Joseph Zagari, Steven Manos, Nader A. Issa, Ian Bassett, Simon Fleming, Ross C. McPhedran, C. Martijn de Sterke and Nicolae A.P. Nicorovici, "Microstructured polymer optical fibre", Optics Express Vol. 9, No. 7, pp. 319-327 (2001).

★ J. M. Dudley, G. Genty, S. Coen, "Supercontinuum Generation in Photonic Crystal Fiber," Reviews of Modern Physics '78', 1135 (2006).

External links

★ Encyclopedia of Laser Physics and Technology on photonic crystal fibers, with many references

★ Steven G. Johnson, Photonic-crystal and microstructured fiber tutorials (2005).

★ Crystal Fibre, manufacturer of PCFs (primarily via air holes in silica fiber).