Discover

(Redirected from Nanoseconds)

The 'second' (SI symbol: 's'), sometimes abbreviated 'sec.', is the name of a unit of time, and is the International System of Units (SI) base unit of time.
SI prefixes are frequently combined with the word ''second'' to denote subdivisions of the second, ''e.g.'', the millisecond (one thousandth of a second) and nanosecond (one billionth of a second). Though SI prefixes may also be used to form multiples of the second (such as “kilosecond,” or one thousand seconds), such units are rarely used in practice. More commonly encountered, non-SI units of time such as the minute, hour, and day increase by multiples of 60 and 24 (rather than by powers of ten as in the SI system).

Contents

International second

Equivalence to other units of time

Historical origin

See also

References

External links

International second

Under the International System of Units, the second is currently defined as the duration of 9,192,631,770 periods of the radiation corresponding to the transition between the two hyperfine levels of the ground state of the caesium-133 atom.^[1] This definition refers to a caesium atom at rest at a temperature of 0 K (absolute zero). The ground state is defined at zero magnetic field. The second thus defined is equivalent to the ephemeris second, which was based on astronomical measurements. (See Historical origin below.)
The international standard symbol for a second is 's' (see ISO 31-1)

Equivalence to other units of time

1 international second is equal to:

★ 1/60 minute

★ 1/3,600 hour

★ 1/86,400 day (IAU system of units)

★ 1/31,557,600 Julian year (IAU system of units)

Historical origin

Originally, the hour was the subdivided sexagesimally (by 60) into ''pars minuta prima'' (first small part, our modern minute), ''pars minuta secunda'' (second small part, our modern second), ''pars minuta tertia'' (third small part) and so on. Although a ''third'' for 1/60 of a second remains in some languages, for example Polish (''tercja'') and Arabic (ثالثة), the modern second is now subdivided decimally.
The factor of 60 comes from the Babylonians who used factors of 60 in their counting system. However, the Babylonians did not subdivide their time units sexagesimally (except for the day). The hour had been defined by the ancient Egyptians as either 1/12 of daytime or 1/12 of nighttime, hence both varied with the seasons. Hellenistic astronomers, including Hipparchus and Ptolemy, defined the hour as 1/24 of a mean solar day. Sexagesimally subdividing this mean solar hour made the second 1/86 400 of a mean solar day. Hellenistic time periods like the mean synodic month were usually specified quite precisely because they were ''calculated'' from carefully selected eclipses separated by hundreds of years—individual ''mean'' synodic months and similar time periods cannot be ''measured''. Nevertheless, with the development of pendulum clocks keeping ''mean time'' (as opposed to the ''apparent time'' displayed by sundials), the second became measurable. The seconds pendulum was proposed as a unit of length as early as 1660 by the Royal Society of London. The duration of a beat or half period (one swing, not back and forth) of a pendulum one metre in length on the earth's surface is approximately one second.^[2]
In 1956 the second was defined in terms of the period of revolution of the Earth around the Sun for a particular epoch, because by then it had become recognized that the Earth's rotation on its own axis was not sufficiently uniform as a standard of time. The Earth's motion was described in Newcomb's Tables of the Sun, which provides a formula for the motion of the Sun at the epoch 1900 based on astronomical observations made between 1750 and 1892. The second thus defined is
:''the fraction 1/31,556,925.9747 of the tropical year for 1900 January 0 at 12 hours ephemeris time.''
This definition was ratified by the Eleventh General Conference on Weights and Measures in 1960. The ''tropical year'' in the definition was not measured, but calculated from a formula describing a mean tropical year which decreased linearly over time, hence the curious reference to a specific ''instantaneous'' tropical year. Because this second was the independent variable of time used in ephemerides of the Sun and Moon during most of the twentieth century (Newcomb's Tables of the Sun were used from 1900 through 1983, and Brown's Tables of the Moon were used from 1920 through 1983), it was called the ephemeris second.
With the development of the atomic clock, it was decided to use atomic clocks as the basis of the definition of the second, rather than the revolution of the Earth around the Sun.
Following several years of work, Louis Essen from the National Physical Laboratory (Teddington, England) and William Markowitz from the United States Naval Observatory (USNO) determined the relationship between the hyperfine transition frequency of the caesium atom and the ephemeris second. Using a common-view measurement method based on the received signals from radio station WWV,^[3] they determined the orbital motion of the Moon about the Earth, from which the apparent motion of the Sun could be inferred, in terms of time as measured by an atomic clock. As a result, in 1967 the Thirteenth General Conference on Weights and Measures defined the second of atomic time in the International System of Units as
:''the duration of 9,192,631,770 periods of the radiation corresponding to the transition between the two hyperfine levels of the ground state of the caesium-133 atom.''
During the 1970s it was realized that gravitational time dilation caused the second produced by each atomic clock to differ depending on its altitude. A uniform second was produced by correcting the output of each atomic clock to mean sea level (the rotating geoid), lengthening the second by about 1. This correction was applied at the beginning of 1977 and formalized in 1980. In relativistic terms, the SI second is defined as the proper time on the rotating geoid.^[4]
The definition of the second was later refined at the 1997 meeting of the BIPM to include the statement
:''This definition refers to a caesium atom at rest at a temperature of 0 K.''
The revised definition would seem to imply that the ideal atomic clock would contain a single caesium atom at rest emitting a single frequency. In practice, however, the definition means that high-precision realizations of the second should compensate for the effects of the ambient temperature (black-body radiation) within which atomic clocks operate and extrapolate accordingly to the value of the second as defined above.

See also

★ Leap second

★ Orders of magnitude (time)

★ UTC

★ Hertz

★ Becquerel

References

1. Leap Seconds
2. The seconds pendulum
3. The definition of the 'atomic' second, , Sigfrido, Leschiutta, Metrologia,
4. R. A. Nelson ''et al.'', "", ''Metrologia'' '38' (2000) 509-529, p. 515.

External links

★ Official BIPM definition of the second

★ Seconds and leap seconds by the USNO

★ The leap second: its history and possible future