'Mach tuck' is an
aerodynamic effect, whereby the
nose of an
aircraft tends to
pitch downwards as the airflow around the wing reaches
supersonic speeds. Note that the aircraft is subsonic, and traveling significantly below
Mach 1.0, when it experiences this effect.
[1]

Shock wave on upper surface of wing moves rearwards as aircraft mach increases
Initially as
airspeed is increased past the
critical Mach number, the wing develops an increasing amount of
lift, requiring a nose-down force or trim to maintain level flight. With increased speed, and the aft movement of the
shock wave, the
wing’s
center of pressure also moves aft causing the start of a nose-down tendency or “tuck.” If allowed to progress unchecked, in an aircraft not designed for supersonic flight, Mach tuck may occur. Although Mach tuck develops gradually, if it is allowed to progress significantly, the center of pressure can move so far rearward that there is no longer enough elevator authority available to counteract it, and the airplane could enter a steep, sometimes unrecoverable dive.
[2] In addition as the shockwave goes towards the rear, it can impinge upon the elevator control surfaces and this can greatly exacerbate the nose down tendency. Partly for this reason, supersonic and subsonic aircraft often have an all-moving tailplane (a
stabilator) which lacks separate elevator control surfaces.
[3]
Recovery from a mach tuck is not always possible. In some cases as the aircraft descends the air density increases and the extra drag will slow the aircraft and control will return.
References
1. Pilot’s Handbook of Aeronautical Knowledge, , , , U.S. Federal Aviation Administration, 2003, FAA-8083-25
2. Airplane Flying Handbook, , , , U.S. Federal Aviation Administration, 2004, FAA-8083-3A
3. [1]