LIGAND

In chemistry, a 'ligand' is an atom, ion, or molecule (see also: functional group) that generally donates one or more of its electrons through a coordinate covalent bond to, or shares its electrons through a covalent bond with, one or more central atoms or ions (these ligands act as a Lewis base). Fewer examples exist where a molecule can be described as a ligand that accepts electrons from a Lewis base (hence, the ligand acts as a Lewis acid).
Most commonly the central atom is a metal or metalloid in inorganic chemistry. But in organic chemistry ligands are also used to protect functional groups (e.g. borane BH₃ as ligand for the protection of phosphine PH₃), or to stabilize reactive compounds (tetrahydrofuran THF as a ligand for BH₃ to make BH₃ easier to handle). The molecule resulting from the coordination of a ligand (or an array of ligands) to a central atom is termed a complex.
Factors that characterize the ligands are their charge, size (bulk), and of course the nature of the constituent atoms.
The ligands in a complex:

★ stabilize the central atom, and

★ dictate the reactivity of the central atom.

Contents

Ligands in metal complexes

Donation and back-donation

Strong field & Weak field Ligands

Denticity

Hapticity vs denticity

Common ligands

Examples of common ligands (by field strength)

Other general encountered ligands (alphabetical)

See also

Ligands in metal complexes

The constitution of metal complexes has been described by Alfred Werner, who developed the basis for modern coordination chemistry. The ligands that are directly bonded to the metal (that is, share electrons), are called "inner sphere" ligands. If the inner-sphere ligands do not balance the charge of the central atom (the oxidation number), this may be done by simple ionic bonding with another set of counter ions (the "outer-sphere" ligands). The complex of the metal with the inner sphere ligands is then called a complex ion (which can be either cationic or anionic). The complex, along with its counter ions, is called a coordination compound. The size of a ligand is indicated by its cone angle.

Donation and back-donation

In general, ligands donate electron density to the (electron deficient) central atom - that is, they overlap between the highest occupied molecular orbital (HOMO) of the ligand with the lowest unoccupied molecular orbital (LUMO) of the central atom. The ligand thus acts as a Lewis base by donating electron density (in general electron pairs) to the central atom, acting as a Lewis acid. In some cases ligands donate only one electron from a singly occupied orbital (the donating atom in these ligands is a radical).
Some metal centers in combination with certain ligands (e.g. carbon monoxide (CO)) can be further stabilised by donating electron density back to the ligand in a process known as ''back-bonding''. In this case a filled, central-atom-based orbital donates density into the LUMO of the (coordinated) ligand.

Strong field & Weak field Ligands

Main articles: crystal field theory

Ligands and metal ions can be ordered by their 'hardness' (see also hard soft acid base theory). Certain metal ions have a preference for certain ligands. In general, 'hard' metal ions prefer weak field ligands, whereas 'soft' metal ions prefer strong field ligands. From a MO point of view, the HOMO of the ligand should have an energy that makes overlap with the LUMO of the metal preferential. Metal ions bound to strong-field ligands follow the Aufbau principle, whereas complexes bound to weak-field ligands follow Hund's rule.
Binding of the metal with the ligands results in a set of molecular orbitals, where the metal can be identified with a new HOMO and LUMO (the orbitals defining the properties and reactivity of the resulting complex) and a certain ordering of the 5 d-orbitals (which may be filled, or partially filled with electrons). In an octahedral environment, the 5 otherwise degenerate d-orbitals split in sets of 2 and 3 orbitals (for a more in depth explanation, see crystal field theory).
::3 orbitals of low energy: ''d_xy'', ''d_xz'' and ''d_yz''
::2 of high energy: ''d''_''z''² and ''d''_{''x''²-''y''²}
The energy difference between these 2 sets of d-orbitals is called the splitting parameter, Δ_o. The magnitude of Δ_o is determined by the field-strength of the ligand: strong field ligands, by definition, increase Δ_o more than weak field ligands. Ligands can now be sorted according to the magnitude of Δ_o (see the table below). This ordering of ligands is almost invariable for all metal ions and is called spectrochemical series.
For complexes with a tetrahedral surrounding, the d-orbitals again split into two sets, but this time in reverse order:
::2 orbitals of low energy: ''d''_''z''² and ''d''_{''x''²-''y''²}
::3 orbitals of high energy: ''d''_''xy'', ''d''_''xz'' and ''d''_''yz''
The energy difference between these 2 sets of d-orbitals is now called Δ_t. The magnitude of Δ_t is smaller than for Δ_o, because in a tetrahedral complex only 4 ligands influence the d-orbitals, whereas in an octahedral complex the d-orbitals are influenced by 6 ligands. When the coordination number is neither octahedral nor tetrahedral, the splitting becomes correspondingly more complex. For the purposes of ranking ligands, however, the properties of the octahedral complexes and the resulting Δ_o has been of primary interest.
The arrangement of the d-orbitals on the central atom (as determined by the 'strength' of the ligand), has a strong effect on virtually all the properties of the resulting complexes. E.g. the energy differences in the d-orbitals has a strong effect in the optical absorption spectra of metal complexes. It turns out that valence electrons occupying orbitals with significant 3d-orbital character absorb in the 400-800 nm region of the spectrum (UV-visible range). The absorption of light (what we perceive as the color) by these electrons (that is, excitation of electrons from one orbital to another orbital under influence of light) can be correlated to the ground state of the metal complex, which reflects the bonding properties of the ligands. The relative change in (relative) energy of the d-orbitals as a function of the field-strength of the ligands is described in Tanabe-Sugano diagrams.

Denticity

Some ligand molecules are able to bind to the metal ion through multiple sites, often because they have free lone pairs on more than one atom. Ligands that bind to more than one site are termed ''chelating'' (from the Greek for ''claw''). For example, a ligand binding through two sites is ''bidentate'' and three sites is ''tridentate''. The ''bite angle'' refers to the angle between the two bonds of a bidentate chelate. Chelating ligands are commonly formed by linking donor groups via organic linkers. A classic example is ethylene diamine, which is derived by the linking of two ammonia groups with an ethylene (-CH₂CH₂-) linker. A classic example of a polydentate ligand is the hexadentate chelating agent EDTA. It is able to bond through six sites, completely surrounding some metals. The number of atoms with which a polydentate ligand bind to the metal centre is called its denticity (symbol κ). κ indicates the number non-contiguous donor sites by which a ligand attaches to a metal. In catalysis the effectiveness of a chelating system depends on the chelating angle or bite angle.

Hapticity vs denticity

Hapticity (η) and denticity are often confused. Hapticity refers to ''contiguous'' atoms that are attached to a metal. Ethylene forms η² complexes because two adjacent carbon atoms bind to the metal. Ethylenediamine forms κ² complexes. Cyclopentadienyl is typically bonded in η⁵ mode because all five carbon atoms are bonded to the metal. EDTA^4- on the other hand, when it is sexidentate, is κ⁶ mode, the amines and the carboxylate oxygen atoms are not connected directly. To simplify matters, ηⁿ tends to refer to unsaturated hydrocarbons and κⁿ tends to describe polydentate amine and carboxylate ligands.
Complexes of polydentate ligands are called ''chelate'' complexes. They tend to be more stable than complexes derived from monodentate ligands. This enhanced stability is attributed to the necessity to break all of the bonds to the central atom for the hexadentate ligand to be displaced. This increased stability or inertness is called the chelate effect. In terms of the enhanced thermodynamic stability of chelate complexes, entropy favors the displacement of many ligands by one polydentate ligand. The increase in the total number of molecules in solution is favorable.
Related to the chelate effect is the macrocyclic effect. A macrocyclic ligand is any large cyclic ligand which at least partially surrounds the central atom and bonds to it, leaving the central atom at the centre of a large ring. The more rigid and the higher its denticity, the more inert will be the macrocyclic complex. Heme is a good example, the iron atom is at the centre of a porphyrin macrocycle, being bound to four nitrogen atoms of the tetrapyrrole macrocycle. The very stable dimethylglyoximate complex of nickel is a synthetic macrocycle derived from the anion of dimethylglyoxime.
Unlike polydentate ligands, ambidentate ligands can attach to the central atom in two places but not both. A good example of this is thiocyanide, SCN^-, which can attach at either the sulfur atom or the nitrogen atom. Such compounds give rise to linkage isomerism.

Common ligands

:''See nomenclature.''
Virtually every molecule and every ion can serve as a ligand for (or "coordinate to") metals. Monodentate ligands include virtually all anions and all simple Lewis bases. Thus, the halides and pseudohalides are important anionic ligands whereas ammonia, carbon monoxide, and water are particularly common charge-neutral ligands. Simple organic species are also very common, be they anionic (RO^- and RCO₂^-) or neutral (R₂O, R₂S, R_3-xNH_x, and R₃P). The steric properties of some ligands are evaluated in terms of their cone angles.
Beyond the classical Lewis bases and anions, all unsaturated molecules are also ligands, utilizing their π-electrons in forming the coordinate bond. Also, metals can bind to the σ bonds in for example silanes, hydrocarbons, and dihydrogen (see also: agostic interaction).
In complexes of non-innocent ligands, the ligand is bonded to metals via conventional bonds, but the ligand is also redox-active.

Examples of common ligands (by field strength)

In the following table the ligands are sorted by field strength (weak field ligands first):

Ligand	formula (bonding atom(s) in bold)	Charge	Most common denticity	Remark(s)
Iodide	'I'-	monoanionic	monodentate
Bromide	'Br'-	monoanionic	monodentate
Sulphide	'S'2-	dianionic	monodentate (M=S), or bidentate bridging (M-S-M')
Thiocyanate	'S'-CN-	monoanionic	monodentate	ambidentate (see also isothiocyanate, ''vide infra'')
Chloride	'Cl'-	monoanionic	monodentate	also found bridging
Nitrate	'O'-NO2-	monoanionic	monodentate
Azide	'N'-N2-	monoanionic	monodentate
Fluoride	'F'-	monoanionic	monodentate
Hydroxide	'O'-H-	monoanionic	monodentate	often found as a bridging ligand
Oxalate	['O'-C(=O)-C(=O)'-O']2-	dianionic	bidentate
Water	H-'O'-H	neutral	monodentate	monodentate
Isothiocyanate	'N'=C=S-	monoanionic	monodentate	ambidentate (see also thiocyanate, ''vide supra'')
Acetonitrile	CH3C'N'	neutral	monodentate
Pyridine	C5H5'N'	neutral	monodentate
Ammonia	'N'H3	neutral	monodentate
Ethylenediamine	en	neutral	bidentate
2,2'-Bipyridine	bipy	neutral	bidentate	easily reduced to its (radical) anion or even to its dianion
1,10-Phenanthroline	phen	neutral	bidentate
Nitrite	O-N-O-	monoanionic	monodentate	ambidentate
Triphenylphosphine	'P'Ph3	neutral	monodentate
Cyanide	'C'N-	monoanionic	monodentate	can bridge between metals (both metals bound to C, or one to C and one to N)
Carbon monoxide	'C'O	neutral	monodentate	can bridge between metals (both metals bound to C)

Note: The entries in the table are sorted by field strength, binding through the stated atom (i.e. as a terminal ligand), the 'strength' of the ligand changes when the ligand binds in an alternative binding mode (e.g. when it bridges between metals) or when the conformation of the ligand gets distorted (e.g. a linear ligand that is forced through steric interactions to bind in a non-linear fashion).

Other general encountered ligands (alphabetical)

In this table other common ligands are listed in alphabetical order.

Ligand	formula (bonding atom(s) in bold)	Charge	Most common denticity	Remark(s)
Acetylacetonate (Acac)	CH3-C('O')-CH-C('O')-CH3	monoanionic	bidentate	In general bidentate, bound through both oxygens, but sometimes bound through the central carbon only, see also analogous ketimine analogues
Alkenes	R2'C=C'R2	neutral		compounds with a C-C double bond
Benzene	'C'6H6	neutral		and other arenes
1,2-Bis(diphenylphosphino)ethane (dppe)	Ph2'P'C2H4'P'Ph2	neutral	bidentate
Corroles			tetradentate
Crown ethers		neutral		primarily for alkali and alkaline earth metal cations
2,2,2-crypt			hexadentate	primarily for alkali and alkaline earth metal cations
Cryptates		neutral
Cyclopentadienyl	[C5H5]-	monoanionic
Diethylenetriamine (dien)		neutral	tridentate	related to TACN, but not constrained to facial complexation
Dimethylglyoximate (dmgH-)		monoanionic
Ethylenediaminetetraacetate (EDTA)		tetra-anionic	hexadentate	actual ligand is the tetra-anion
Ethylenediaminetriacetate		trianionic	pentadentate	actual ligand is the trianion
glycinate			bidentate	other α-amino acid anions are comparable (but chiral)
Heme		dianionic	tetradentate	macrocyclic ligand
Nitrosyl	'N'O+	cationic		bent (1e) and linear (3e) bonding mode
Scorpionate ligand			tridentate
Sulfite		monoanionic	monodentate	ambidentate
2,2',5',2''-Terpyridine (terpy)		neutral	tridentate	meridional bonding only
Thiocyanate		monoanionic	monodentate	ambidentate, sometimes bridging
Triazacyclononane (tacn)	(C2H4)3('N'R)3	neutral	tridentate	macrocyclic ligand see also the N,N',N"-trimethylated analogue
Triethylenetetramine (trien)		neutral	tetradentate
Tris(2-aminoethyl)amine (tren)		neutral	tetradentate
Tris(2-diphenylphosphineethyl)amine (np3)		neutral	tetradentate
Terpyridine		neutral	tridentate

See also

★ 2-Mercaptoindole

★ Crystal field theory

★ Ligand field theory

★ Coordination chemistry

★ Inorganic chemistry

★ Radioligand

★ Tanabe-Sugano diagram

★ Spectrochemical series

★ Scatchard equation