 SS John W. Brown is one of only two surviving operational Liberty ships. SS ''John W. Brown'', one of two surviving operational Liberty ships. |
| General Characteristics | |
|---|---|
| Size: | Displacement: 14,245 tons; Gross Tons: 7,176.5 |
| Length: | 441 ft 6 in (135 m) |
| Beam: | 56 ft 10.75 in (17.3 m) |
| Draft: | 27 ft 9.25 in (8.5 m) |
| Propulsion: | Two oil fired boilers, triple expansion steam engine, single screw, 2500 horsepower (1.9 MW) |
| Speed: | 11 to 11.5 knots (20 to 21 km/h) |
| Range: | 23,000 miles (37,000 km) |
| Complement: | 41 |
| Armament: | Stern-mounted 4 in (102 mm) deck gun for use against surfaced submarines, variety of anti-aircraft guns. |
| Capacity: | 9,140 tons cargo |
The 'Liberty ships' were
cargo ships built in the
United States during
World War II. They were British in conception but adapted by the USA, cheap and quick to build, and came to symbolize U.S. wartime industrial output. Based on vessels ordered by
Britain to replace ships torpedoed by
German U-boats, they were purchased for the U.S. fleet and for
lend-lease provision to Britain. Eighteen American
shipyards built 2,751 Liberties between 1941 and 1945, easily the largest number of ships produced to a single design.
The production of these vessels mirrored, on a much larger scale, the manufacture of the
''Hog Island'' ship and similar standardized types during the
First World War. The immense effort to build Liberty ships, the sheer number of ships built, and the fact that some of the ships survived far longer than the original design life of five years, make them the subject of much study.
History and service
In 1936, the American
Merchant Marine Act was passed to subsidize the annual construction of 50 commercial merchant vessels to be used in wartime by the
United States Navy as naval auxiliaries. The number was doubled in 1939 and again in 1940 to 200 ships a year. Ship types included a tanker and three types of merchant vessel, all to be powered by
steam turbines. Limited industrial capacity, especially for turbine construction, meant that relatively few of these ships were built.
In 1940, the
British Government ordered 60
tramp steamships from American yards to replace war losses and boost the merchant fleet. This ''Ocean'' class were simple but fairly large (for the time) with a single coal-fired, 2,500 horsepower (1.9 MW)
reciprocating engine of obsolete but reliable design. Britain specified coal plants because it had plenty of coal mines but no indigenous oil fields. The predecessor designs, including the ''Northeast Coast, Open Shelter Deck Steamer'', were based on a simple ship originally produced in
Sunderland by
J.L. Thompson & Sons (see
Silver Line) in
1879, and widely manufactured until the SS ''
Dorrington Court'' of the 1930s. The order specified an 18 inch (457 mm) increase in draught to boost displacement by 800 tons to 10,100 tons. The accommodation, bridge and main engine of these vessels were located amidships, with a long tunnel to connect the main engine shaft to its aft extension to the propeller. The first ''Ocean''-class ship, ''Ocean Vanguard'' was launched on
16 August 1941.
The design was modified by the
United States Maritime Commission to conform to American construction practices and to make it even quicker and cheaper to build. The U.S. version was designated EC2-S-C1 — Emergency Cargo, 2 = large ship. The new design replaced much riveting, which accounted for one-third of the labour costs, with
welding and featured oil-fired boilers. The order was given to a conglomerate of West Coast engineering and construction companies known as the
Six Companies, headed by
Henry J. Kaiser, and was also adopted as the Merchant Marine Act design.
On
27 March 1941, the number of lend-lease ships was increased to 200 by the
Defense Aid Supplemental Appropriations Act, and increased again in April to 306, of which 117 would be Liberty ships.
The ships were constructed of welded sections that were then welded together. This is similar to the technique used by
Palmer's at
Jarrow but substitutes welding for riveting. Riveted ships took several months to construct. The work force was newly trained - no one previously built welded ships. As America entered the war the shipbuilding yards employed women to replace men who were enlisting in the armed forces.
The ships initially had a poor public image because of their looks. In a speech announcing the emergency shipbuilding program,
President Roosevelt had referred to the ship as "a dreadful looking object," and ''Time'' magazine called it an "Ugly Duckling." To try to assuage public opinion,
27 September 1941 was designated ''Liberty Fleet Day'', and the first 14 "Emergency" vessels were launched that day. The first of these was
SS ''Patrick Henry'', launched by President
Franklin D. Roosevelt. In remarks at the launch ceremony, FDR cited
Patrick Henry's 1775 speech that finished "
Give me liberty or give me death". Roosevelt said that this new class of ships would bring liberty to Europe, which gave rise to the name Liberty Ship.
Early on, each ship took about 230 days to build (''Patrick Henry'' took 244 days), but the average eventually dropped to 42 days. The record was set by
''Robert E. Peary'', which was launched 4 days and 15 1/2 hours after the
keel was laid, although this
publicity stunt was not repeated -- and in fact much fitting-out and other work remained to be done after the Peary was launched. The ships were made assembly-line style, from prefabricated sections. In 1943, three new Liberty ships were being completed every day. They were mainly named after famous Americans, starting with the signatories of the
Declaration of Independence.
Any group which raised
War bonds worth $2 million could propose a name. Most were named for deceased people. The only living namesake was Francis J. O'Gara, the
purser of the
SS ''Jean Nicolet'', who was thought to have been killed in a submarine attack but in fact survived the war in a
Japanese
prisoner of war camp. Other exceptions to the naming rule were the
SS ''Stage Door Canteen'', named for the
USO club in
New York, and the
SS ''U.S.O.'', named after the organization itself
[1].
Another notable Liberty ship was
SS ''Stephen Hopkins'', which sank the German
commerce raider Stier in a ship-to-ship gun battle in 1942 and became the first American ship to sink a German surface combatant.
SS ''Richard Montgomery'' is also notable, though in a less positive way; the wreck of the ship lies off the coast of
Kent with 1,500 tons of
explosives still on board, enough to match a small
nuclear weapon should they ever go off.
The last Liberty ship constructed was the
SS ''Albert M. Boe'', launched on
26 September 1945 and delivered on
30 October 1945. She was named after the chief engineer of a
United States Army freighter who had stayed below decks to shut down his engines after a
13 April 1945 explosion, an act that won him a posthumous
Merchant Marine Distinguished Service Medal [1].
Problems

''Jeremiah O'Brien''
Early Liberty ships suffered hull and deck cracks, and a few were lost to such structural defects. During World War II, there were nearly 1,500 instances of significant
brittle fractures. Nineteen ships broke in half without warning, including the
SS ''John P. Gaines''[2][3], which sank on
24 November 1943 with the loss of 10 lives. Suspicion fell on the shipyards who had often used inexperienced workers and new
welding techniques to produce large numbers of ships in great haste.
Constance Tipper [4] of
Cambridge University demonstrated that the fractures were not initiated by welding, but instead by the grade of steel used which suffered from
embrittlement. She discovered that the ships in the North Atlantic were exposed to temperatures that could fall below a critical point when the mechanism of cracking changed from
ductile to
brittle, and thus the hull could fracture relatively easily. The predominantly welded (as opposed to riveted) hull construction then allowed cracks to run for large distances unimpeded. One common type of crack nucleated at the square corner of a hatch which coincided with a welded seam, both the corner and the weld acting as
stress concentrators. Furthermore, the ships were frequently grossly overloaded and some of the problems occurred during or after severe storms at sea that would have placed any ship at risk. Various reinforcements were applied to the Liberty Ships to arrest the crack problems, and the successor design, the
Victory ship, was built stronger and less stiff to better deal with
fatigue.
Several designs of mass-produced petroleum tankers were also produced, the most numerous being the
T2 tanker series, with about 490 built between 1942 and the end of 1945.
After the war

''Jeremiah O'Brien''
Many Liberty ships survived the war, and made up a large percentage of the postwar cargo fleet. Many were bought by Greek shipowners at very low prices. Shipping magnates like
Theodoracopoulos were known to have started their fleets by buying many Liberties. The term "Liberty-size cargo" for 10,000 tons may still be heard in the shipping business.
In the 1960s three Liberty ships were reactivated and converted to
technical research ships (they were actually used to gather electronic intelligence and for radar picket duties) by the
U.S. Navy with the
hull type AGTR. SS ''Samuel R. Ailken'' became the USS ''Oxford'' (AGTR-1), SS ''Robert W. Hart'' became the USS ''Georgetown'' (AGTR-2), and SS ''J. Howland Gardner'' became the USS ''Jamestown'' (AGTR-3). All of these ships were decommissioned and stricken from the
Naval Register in 1969 and 1970.
As of 2005, two operational Liberty ships survive: the
SS ''John W. Brown'' (following a long career as a school ship and many internal modifications) and the
''Jeremiah O'Brien'', largely in original condition. Both
museum ships, they still put out to sea regularly. In 1994, the O'Brien steamed from San Francisco to England and France, the only large ship that participated in the World War II D-Day invasion to return for the 50th anniversary. The
SS ''Albert M. Boe'' survives as ''Star of Kodiak'', a floating
cannery, docked in
Kodiak Harbor.
U.S. shipyards
Liberty ships were built at eighteen shipyards located along the Atlantic, Pacific and Gulf Coasts
★
Alabama Drydock and Shipbuilding,
Mobile, Alabama
★
Bethlehem-Fairfield Shipyard,
Baltimore, Maryland
★
California Shipbuilding Corp.,
Los Angeles, California
★
Delta Shipbuilding Corp.,
New Orleans, Louisiana
★
J. A. Jones,
Panama City, Florida
★
J. A. Jones,
Brunswick, Georgia. See
Brunswick, Georgia for some interesting history.
★
Kaiser Company,
Vancouver, Washington
★
Marinship,
Sausalito, California
★
New England Shipbuilding East Yard,
South Portland, Maine, a subsidiary of
Bath Iron Works.
★
New England Shipbuilding West Yard,
South Portland, Maine, Both East and West yards on the same 60 acres of shipyard.
★
North Carolina Shipbuilding Company,
Wilmington, North Carolina
★
Oregon Shipbuilding Corporation,
Portland, Oregon
★
Richmond Shipyards,
Richmond, California, a Kaiser facility
★
St. Johns River Shipbuilding,
Jacksonville, Florida
★
Southeastern Shipbuilding,
Savannah, Georgia
★
Todd Houston Shipbuilding,
Houston, Texas
★
Walsh-Kaiser Co., Inc.,
Providence, Rhode Island
See also:
★ Project Liberty Ship - The Shipyards
[2]
★ The United States Merchant Marine - Liberty Ships Built During World War II by Shipyard.
[3]
★ World War II Construction Records - Private-Sector Shipyards that Built Ships for the U.S. Maritime Commission
[4]
★ Shipbuilding under the United States Maritime Commission, 1936 to 1950
[5]
Fictional appearances
A Liberty ship was featured in the
Quantum Leap episode 'Ghost Ship'.
A Liberty ship, converted to a hospital ship, is the eponymous subject and setting of
Alistair MacLean's mystery thriller ''San Andreas'' (1984) The prologue to this novel, also by MacLean, is an interesting essay on Liberty ships and the conditions, character and behavior of the British Merchant Marine owners that used them, and sailors that sailed them.
A Liberty ship is featured in the
Humphrey Bogart movie ''Action in the North Atlantic'' (1943). Its deck gun is described as being 5" rather than 4", probably for wartime propaganda reasons.
In
Clive Cussler's book, ''Deep Six'', the prologue details a Liberty ship that disappears in the 1960s and becomes a recurring Ghost Ship in
The Flying Dutchman vein. It is later found by Dirk Pitt leading to further adventures from there.
Most of the engine room scenes of the 1997 film ''
Titanic'' were shot aboard the museum Liberty Ship SS Jeremiah O'Brien in San Francisco Bay.
See also
★
Fatigue (material)
★
List of Liberty ships
★
List of Liberty ships by hull number
★
T2 tanker
★
Type C1 ship
★
Type C2 ship
★
Victory ship
★
Hog Islander
Notes
1. Reading 1: Liberty Ships ''National Park Service Cultural Resources.''
2. Wreck of the SS John P Gaines
3. Fracture - some maritime examples. ''Mechanical Engineering Department, University of Western Australia.''
4. Constance Tipper (researcher into Liberty ship fracture)
External links
★
Liberty Ships built by the United States Maritime Commission in World War II
★
Links to Liberty Ship information
★
SS ''Jeremiah O'Brien'' website (one of two still operational Liberty ships)
★
SS ''John W. Brown'' website (one of two still operational Liberty ships)
★
Liberty Ships and Victory Ships, America's Lifeline in Warfor a lesson on Liberty ships and Victory ships from the National Park Service's Teaching with Historic Places.
★
American Victory
★
Seafarers International Union
★
Ships for Victory: J.A. Jones Construction Company and Liberty Ships in Brunswick, Georgia Eighty-four black-and-white photographs from the J.A. Jones Construction Company collection at the Brunswick-Glynn County Library that depict the company’s World War II cargo ship building activities in its Brunswick, Georgia shipyard from 1943 to 1945.
References
★ Ships for Victory: A History of Shipbuilding under the U.S. Maritime Commission in World War II, by Frederic C. Lane. Johns Hopkins University Press, 2001. ISBN 0-8018-6752-5
★ The Liberty Ships; The history of the "emergency" type cargo ships constructed in the United States during World War II, by L. A. Sawyer and W. H. Mitchell, Cambridge, Maryland: Cornell Maritime Press, 1970