'"Fat Man"' is the codename of the
atomic bomb that was detonated over
Nagasaki,
Japan, by the
United States on
August 9,
1945. It was the 2nd of the two nuclear weapons to be used in
warfare and was the third man-made nuclear explosion of all time. The name also refers more generically to the early
nuclear weapon designs of U.S. weapons based on the "Fat Man" model. It was an
implosion-type weapon with a
plutonium core.
"Fat Man" was detonated at an altitude of about 1,800 feet (550 m) over the city, and was dropped from a
B-29 bomber ''
Bockscar'', piloted by Major
Charles Sweeney. The bomb had a yield of about 21
kilotons of
TNT, or 8.78×10
13 joules = 88 TJ (
terajoules).
[1] Because of Nagasaki's hilly terrain, the damage was somewhat less extensive than that in relatively flat
Hiroshima. An estimated 40,000 people were killed outright by the bombing at Nagasaki, and about 25,000 were injured.
[2] Many thousands more would die later from related injuries, and
radiation sickness from
nuclear fallout. The aerial bombing raid on
Nagasaki had third highest fatality rate
[3] in
World War II after the
nuclear strike on Hiroshima[4][5][6][7] and the
March 9/10 1945 fire bombing raid on Tokyo[8].
Technology

Illustration of the implosion concept.
The weapon was 10 feet 8 inches (3.25 m) long, five feet (1.52 m) in diameter, and weighed 10,200 pounds (4,630
kg). In accordance with the name, it was more than twice as wide as
Little Boy, which was dropped on
Hiroshima three days earlier; however, the mass was only 10% more than that of the
Little Boy.
"Fat Man" was an
implosion-type weapon using
plutonium. A subcritical sphere of plutonium was placed in the center of a hollow sphere of
high explosive. Numerous
detonators located on the surface of the high explosive were fired simultaneously to produce a powerful inward
pressure on the core, squeezing it and increasing its density, resulting in a supercritical condition and a nuclear explosion.
The difficulty in the design lay primarily in properly compressing the plutonium core into a near-perfect sphere; if the compression was not symmetrical it would cause the plutonium to be simply ejected from the weapon, making it an inefficient and un-impressive "
dirty bomb". In order to accomplish the compression, the high-explosive system had to be carefully designed as a series of
explosive lenses which used alternating fast- and slow-burning explosives to shape the explosive shockwave into the desired spherical shape. An early idea of this sort had been raised by physicist
Richard Tolman during early discussions of possible bomb designs, though
Seth Neddermeyer is credited for developing the idea further. The idea of using
shaped charges came from mathematician
John von Neumann, and both he and
George Kistiakowsky eventually ended up being the principal architects behind the lens system.
Robert Christy is generally credited with the insight that a solid subcritical sphere of Plutonium could be compressed to a critical state greatly simplifying the task since earlier efforts had attempted the more difficult compression of shapes like spherical shells. Because Christy's insight made the feasibility of a Plutonium bomb much more likely, the weapon tested at Alamagordo and used at Nagasaki is sometimes referred to as the "Christy Gadget."

The "
Trinity" device was similar to the "Fat Man" bomb.
At first it was thought that two pieces of subcritical plutonium (Pu-239) could simply be shot into one another to create a nuclear explosion, and a plutonium gun-type design of this sort (known as the "
Thin Man" bomb) was worked on for some time during the Manhattan Project. However in April 1944 it was discovered that plutonium created for the bomb in the
nuclear reactors at
Hanford, Washington—even though it was supergrade weapon plutonium containing only about 0.9% Pu-240—was not as pure as the initial samples of plutonium developed at the
cyclotrons at
Ernest O. Lawrence's
Radiation Laboratory in
Berkeley, California. Because of the presence of the isotope Pu-240, reactor-bred plutonium had a much higher rate of spontaneous
neutron emission than was previously thought, and if a gun-type device was used it would most likely pre-detonate and result in a messy and costly "fizzle." The
spontaneous fission rate of Pu-240 is 415,000 fissions/(s·kg), and the amount was 0.9% of 6.2 kg, is 56 g. Thus there were 23,000 spontaneous fissions per second. This means that the last few centimeters would have to be travelled in preferably much less than 40 microseconds.
It is theoretically possible to build a plutonium gun-type device, but it would need to be 19 feet long in order to accelerate the subcritical masses sufficiently to be fused into a critical mass before a fizzle occurs. The mass of a plutonium gun-type device would have been beyond the payload of the B-29.
After this problem was realized, the entire
Los Alamos laboratory re-organized around the problem of the implosion bomb, the "Fat Man" starting in June 1944.
The gun-type method could still be used for highly enriched
uranium, though, and was employed in the "
Little Boy" weapon, which was used against
Hiroshima,
Japan. For a variety of reasons, the implosion method is both more efficient than the gun-type method, and also far safer, as a perfect synchronization of the explosion lenses is required for the core to properly detonate, greatly reducing the chances of an accidental nuclear detonation.

As a result of espionage information procured by
Klaus Fuchs, the first Soviet bomb, "
RDS–1" (above) closely resembled, even in its external shape, the "Fat Man" bomb.
Because of its complicated firing mechanism, and the need for previously untested synchronization of explosives and precision design, it was felt that a full test of the concept was needed before the scientists and military representatives could be confident it would perform correctly under combat conditions. On
July 16,
1945, a device utilizing a similar mechanism (called the "
gadget" for security reasons) detonated in a
test explosion at a remote site in
New Mexico, known as the "
Trinity" test. In the end, it gave somewhere around 20 kt (80 TJ), 2 to 4 times the expected yield.
The
Soviet Union's first nuclear weapon detonated at Operation First Lightning (known as "
Joe 1" in the West) was more or less a purposeful copy of the "Fat Man" device, on which they had obtained detailed information from the spy
Klaus Fuchs.
The names for all three projects ("Fat Man", "Thin Man", and "Little Boy") were created by
Robert Serber, a former student of Los Alamos director
Robert Oppenheimer's who worked on the project. According to his later memoirs, he chose them based on their design shapes; the "Thin Man" would be a very long device, and the name came from the
Dashiell Hammett detective novel and
series of movies by the same name; the "Fat Man" bomb would be round and fat and was named after
Sidney Greenstreet's character in ''
The Maltese Falcon''. "Little Boy" would come last and be named only to contrast to the "Thin Man" bomb.
[9]
Interior of bomb
The original blueprints of the interior of both Fat Man and Little Boy are still classified. However, much information about the main parts is available in the unclassified public literature. Of particular interest is a description of Fat Man sent to Moscow by Soviet spies at Los Alamos in 1945. It was released by the Russian government in 1992.
[10]
Below is a diagram of the main parts of the "Fat Man" bomb itself, followed by a more detailed look at the different materials used in the
physics package of the bomb (the part responsible for the nuclear detonation).
| # AN 219 contact fuse (four)# ''Archie'' radar antenna# Plate with batteries (to detonate charge surrounding nuclear components)# ''X-Unit,'' a firing set placed near the charge# Hinge fixing the two ellipsoidal parts of the bomb# Physics package (see details below)# Plate with instruments (radars, baroswitches and timers)# Barotube collector# ''California Parachute'' tail assembly (.20-inch aluminum sheet) |
Physics package

Fat_Man_Internal_Components.gif
Assembly

Jim Sanborn's "Critical Assembly." The bottom hemisphere of the pusher, with pieces of the boron shell, tamper, pit, and urchin.

The physics package getting its shell.

Fat Man on its transport carriage.
To allow insertion of the plutonium pit as late as possible in the bomb's assembly, the spherical U-238 tamper had a 4" diameter cylindrical hole running through it, like the hole in a cored apple. The missing cylinder, containing the plutonium pit, could be slipped in through a hole in the surrounding aluminum pusher.
In August of 1945, it was assembled on Tinian Island. When the physics package was fully assembled and wired, it was placed inside its ellipsoidal aerodynamic bombshell and wheeled to the bomb bay of a B-29 named "Bockscar" for its flight to Nagasaki on August 9.
In 2003, these concentric spheres and cylinder were recreated as the centerpiece of an art installation called "Critical Assembly" by sculptor Jim Sanborn. Using non-nuclear materials, he replicated the internal components of the "Trinity" bomb, which had the same design as Fat Man. Critical Assembly was first displayed at the Corcoran Gallery of Art, in Washington, DC.
[11]
Detonation sequence
The plutonium must be compressed to twice its normal density before free neutrons are added to start the fission chain reaction:
★
★
★
★
★
★

Fat Man Detonation
★
★
★
★
The result is the fissioning of about two and a half of the thirteen pounds of plutonium in the pit, and the release of twenty-one kilotons of energy (21,000 tons of TNT).
See also
★
Atomic bombings of Hiroshima and Nagasaki
★ ''
Fat Man and Little Boy'', a 1989 film that reenacts the Manhattan Project
★
List of nuclear weapons
★
Manhattan Project
★
The gadget
★
Trinity test
Notes
1. http://www.warbirdforum.com/hiroshim.htm
2. http://www.yale.edu/lawweb/avalon/abomb/mp10.htm
3. http://www.cfo.doe.gov/me70/manhattan/nagasaki.htm
4. http://books.nap.edu/openbook.php?record_id=11340&page=141
5. http://www.rerf.or.jp/general/qa_e/
6. Radiobiology for the radiologist. Lippincott Williams & Wilkins, 6th edition. Chapter 10, Sections 3,4,5.
7. http://www.cfo.doe.gov/me70/manhattan/hiroshima.htm
8. Richard B. Frank, ''Downfall'', p. 17–18.
9. Robert Serber, ''Peace & War: Reminiscences of a Life on the Frontiers of Science'' (New York: Columbia University Press, 1998): 104.
10. V.P. Visgin, ed. 1992. At the source of the Soviet atomic project: the role of espionage, 1941-1946. ''Problems in the History of Science and Technology'' 3:97. Described in Richard Rhodes, ''Dark Sun: The Making of the Hydrogen Bomb''. Simon and Schuster, 1995. pp. 193-8.
11. Jim Sanborn, ''Atomic Time: Pure Science and Seduction'', Jonathan Binstock, ed., Corcoran Gallery of Art, 2003, p. 23.
External links
★
Video of Fat Man detonation over Nagasaki
★
Video of Little Boy and Fat Man bombs
★
thorough descriptions of Gadget ("a great deal of tissue paper and Scotch tape were used to make everything fit snugly") and
Fat Man at Nuclear Weapons Archive
★
The Design of Gadget, Fat Man, and "Joe 1" (RDS-1)
★
Fat Man Model in QuickTime VR format