العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
EspañolDIVISION (MATHEMATICS)
In mathematics, especially in elementary arithmetic, 'division' is an arithmetic operation which is the inverse of multiplication.
Specifically, if ''c'' times ''b'' equals ''a'', written:
:
where ''b'' is not zero, then ''a'' divided by ''b'' equals ''c'', written:
:
For instance,
:
since
:.
In the above expression, ''a'' is called the 'dividend', ''b'' the 'divisor' and ''c'' the 'quotient'.
Division by zero (i.e. where the divisor is zero) is not defined.
Division is most often shown by placing the ''dividend'' over the ''divisor'' with a horizontal line, also called a vinculum, between them. For example, ''a'' divided by ''b'' is written
:
This can be read out loud as "a divided by b" or "a over b". A way to express division all on one line is to write the ''dividend'', then a slash, then the ''divisor'', like this:
:
This is the usual way to specify division in most computer programming languages since it can easily be typed as a simple sequence of characters.
A typographical variation which is halfway between these two forms uses a slash but elevates the dividend, and lowers the divisor:
:''a''⁄''b'' .
Any of these forms can be used to display a fraction. A fraction is a division expression where both dividend and divisor are integers (although typically called the ''numerator'' and ''denominator''), and there is no implication that the division needs to be evaluated further.
A less common way to show division is to use the obelus (or division sign) in this manner:
:
This form is infrequent except in elementary arithmetic. The obelus is also used alone to represent the division operation itself, as for instance as a label on a key of a calculator.
In some non-English-speaking cultures, "a divided by b" is written ''a'' : ''b''. However, in English usage the colon is restricted to expressing the related concept of ratios (then "a is to b").
With a knowledge of multiplication tables, two integers can be divided on paper using the method of long division. If the dividend has a fractional part (expressed as a decimal fraction), one can continue the algorithm past the ones place as far as desired. If the divisor has a fractional part, one can restate the problem by moving the decimal to the right in both numbers until the divisor has no fraction.
In modern computers, long division has been replaced by faster methods; see Division (digital).
Division can be calculated with an abacus by repeatedly placing the dividend on the abacus, and then subtracting the divisor the offset of each digit in the result, counting the number of divisions possible at each offset.
In modular arithmetic, some numbers have a multiplicative inverse with respect to the modulus. In such a case, division can be calculated by multiplication. This approach is useful in computers that do not have a fast division instruction.
Division of integers is not closed. Apart from division by zero being undefined, the quotient will not be an integer unless the dividend is an integer multiple of the divisor; for example 26 cannot be divided by 10 to give an integer. In such a case there are four possible approaches.
# Say that 26 cannot be divided by 10.
# Give the answer as a decimal fraction or a mixed number, so or . This is the approach usually taken in mathematics.
# Give the answer as an integer ''quotient'' and a ''remainder'', so remainder 6.
# Give the integer quotient as the answer, so . This is sometimes called ''integer division''.
One has to be careful when performing division of integers in a computer program. Some programming languages, such as C, will treat division of integers as in case 4 above, so the answer will be an integer. Other languages, such as MATLAB, will first convert the integers to real numbers, and then give a real number as the answer, as in case 2 above.
Names and symbols used for integer division include div, /, , and %. Definitions vary regarding integer division when the quotient is negative: rounding may be toward zero or toward minus infinity.
Divisibility rules can sometimes be used to quickly determine whether one integer divides exactly into another.
The result of dividing two rational numbers is another rational number when the divisor is not 0. We may define division of two rational numbers ''p''/''q'' and ''r''/''s'' by
:
All four quantities are integers, and only ''p'' may be 0. This definition ensures that division is the inverse operation of multiplication.
Division of two real numbers results in another real number when the divisor is not 0. It is defined such ''a''/''b'' = ''c'' if and only if ''a'' = ''cb'' and ''b'' ≠ 0.
Dividing two complex numbers results in another complex number when the divisor is not 0, defined thus:
:
All four quantities are real numbers. ''r'' and ''s'' may not both be 0.
Division for complex numbers expressed in polar form is simpler and easier to remember than the definition above:
:
Again all four quantities are real numbers. ''r'' may not be 0.
One can define the division operation for polynomials. Then, as in the case of integers, one has a remainder. See polynomial long division.
One can define a division operation for matrices. The usual way to do this is to define ''A'' / ''B'' = ''AB''−1, where ''B''−1 denotes the inverse of ''B''.
Because matrix multiplication is not commutative, one can also define a left division or so-called ''backslash-division'' as ''A'' ''B'' = ''A''−1''B''. For this to be well defined, ''B''−1 need not exist, however ''A''−1 does need to exist. To avoid confusion, division as defined by ''A'' / ''B'' = ''AB''−1 is sometimes called ''right division'' or ''slash-division'' in this context.
To avoid problems when ''A''−1 and/or ''B''−1 do not exist, division can also be defined as multiplication with the pseudoinverse, i.e., ''A'' / ''B'' = ''AB''+ and ''A'' ''B'' = ''A''+''B'', where ''A''+ and ''B''+ denote the pseudoinverse of ''A'' and ''B''.
In abstract algebras such as matrix algebras and quaternion algebras, fractions such as are typically defined as or where is presumed to be an invertible element (i.e. there exists a multiplicative inverse such that where is the multiplicative identity). In an integral domain where such elements may not exist, ''division'' can still be performed on equations of the form or by left or right cancellation, respectively. More generally "division" in the sense of "cancellation" can be done in any ring with the aforementioned cancellation properties. If such a ring is finite, then by an application of the pigeonhole principle, every nonzero element of the ring is invertible, so ''division'' by any nonzero element is possible in such a ring. To learn about when ''algebras'' (in the technical sense) have a division operation, refer to the page on division algebras. In particular Bott periodicity can be used to show that any real normed division algebra must be isomorphic to either the real numbers 'R', the complex numbers 'C', the quaternions 'H', or the octonions 'O'.
The derivative of the quotient of two functions is given by the quotient rule:
:
There is no general method to integrate the quotient of two functions.
★ Aliquot
★ Division (electronics)
★ Vulgar fraction
★ Multiplicative inverse
★ Inverse element
★ Division by two
★ Long division
★ Quasigroup
★ Group
★ Field
★ Vinculum
★
★ Division on a Japanese abacus selected from Abacus: Mystery of the Bead
★ Chinese Short Division Techniques on a Suan Pan
★ Rules of divisibility
Specifically, if ''c'' times ''b'' equals ''a'', written:
:
where ''b'' is not zero, then ''a'' divided by ''b'' equals ''c'', written:
:
For instance,
:
since
:.
In the above expression, ''a'' is called the 'dividend', ''b'' the 'divisor' and ''c'' the 'quotient'.
Division by zero (i.e. where the divisor is zero) is not defined.
Notation
Division is most often shown by placing the ''dividend'' over the ''divisor'' with a horizontal line, also called a vinculum, between them. For example, ''a'' divided by ''b'' is written
:
This can be read out loud as "a divided by b" or "a over b". A way to express division all on one line is to write the ''dividend'', then a slash, then the ''divisor'', like this:
:
This is the usual way to specify division in most computer programming languages since it can easily be typed as a simple sequence of characters.
A typographical variation which is halfway between these two forms uses a slash but elevates the dividend, and lowers the divisor:
:''a''⁄''b'' .
Any of these forms can be used to display a fraction. A fraction is a division expression where both dividend and divisor are integers (although typically called the ''numerator'' and ''denominator''), and there is no implication that the division needs to be evaluated further.
A less common way to show division is to use the obelus (or division sign) in this manner:
:
This form is infrequent except in elementary arithmetic. The obelus is also used alone to represent the division operation itself, as for instance as a label on a key of a calculator.
In some non-English-speaking cultures, "a divided by b" is written ''a'' : ''b''. However, in English usage the colon is restricted to expressing the related concept of ratios (then "a is to b").
Computing division
With a knowledge of multiplication tables, two integers can be divided on paper using the method of long division. If the dividend has a fractional part (expressed as a decimal fraction), one can continue the algorithm past the ones place as far as desired. If the divisor has a fractional part, one can restate the problem by moving the decimal to the right in both numbers until the divisor has no fraction.
In modern computers, long division has been replaced by faster methods; see Division (digital).
Division can be calculated with an abacus by repeatedly placing the dividend on the abacus, and then subtracting the divisor the offset of each digit in the result, counting the number of divisions possible at each offset.
In modular arithmetic, some numbers have a multiplicative inverse with respect to the modulus. In such a case, division can be calculated by multiplication. This approach is useful in computers that do not have a fast division instruction.
Division of integers
Division of integers is not closed. Apart from division by zero being undefined, the quotient will not be an integer unless the dividend is an integer multiple of the divisor; for example 26 cannot be divided by 10 to give an integer. In such a case there are four possible approaches.
# Say that 26 cannot be divided by 10.
# Give the answer as a decimal fraction or a mixed number, so or . This is the approach usually taken in mathematics.
# Give the answer as an integer ''quotient'' and a ''remainder'', so remainder 6.
# Give the integer quotient as the answer, so . This is sometimes called ''integer division''.
One has to be careful when performing division of integers in a computer program. Some programming languages, such as C, will treat division of integers as in case 4 above, so the answer will be an integer. Other languages, such as MATLAB, will first convert the integers to real numbers, and then give a real number as the answer, as in case 2 above.
Names and symbols used for integer division include div, /, , and %. Definitions vary regarding integer division when the quotient is negative: rounding may be toward zero or toward minus infinity.
Divisibility rules can sometimes be used to quickly determine whether one integer divides exactly into another.
Division of rational numbers
The result of dividing two rational numbers is another rational number when the divisor is not 0. We may define division of two rational numbers ''p''/''q'' and ''r''/''s'' by
:
All four quantities are integers, and only ''p'' may be 0. This definition ensures that division is the inverse operation of multiplication.
Division of real numbers
Division of two real numbers results in another real number when the divisor is not 0. It is defined such ''a''/''b'' = ''c'' if and only if ''a'' = ''cb'' and ''b'' ≠ 0.
Division of complex numbers
Dividing two complex numbers results in another complex number when the divisor is not 0, defined thus:
:
All four quantities are real numbers. ''r'' and ''s'' may not both be 0.
Division for complex numbers expressed in polar form is simpler and easier to remember than the definition above:
:
Again all four quantities are real numbers. ''r'' may not be 0.
Division of polynomials
One can define the division operation for polynomials. Then, as in the case of integers, one has a remainder. See polynomial long division.
Division of matrices
One can define a division operation for matrices. The usual way to do this is to define ''A'' / ''B'' = ''AB''−1, where ''B''−1 denotes the inverse of ''B''.
Left and right division
Because matrix multiplication is not commutative, one can also define a left division or so-called ''backslash-division'' as ''A'' ''B'' = ''A''−1''B''. For this to be well defined, ''B''−1 need not exist, however ''A''−1 does need to exist. To avoid confusion, division as defined by ''A'' / ''B'' = ''AB''−1 is sometimes called ''right division'' or ''slash-division'' in this context.
Matrix division and pseudoinverse
To avoid problems when ''A''−1 and/or ''B''−1 do not exist, division can also be defined as multiplication with the pseudoinverse, i.e., ''A'' / ''B'' = ''AB''+ and ''A'' ''B'' = ''A''+''B'', where ''A''+ and ''B''+ denote the pseudoinverse of ''A'' and ''B''.
Division in abstract algebra
In abstract algebras such as matrix algebras and quaternion algebras, fractions such as are typically defined as or where is presumed to be an invertible element (i.e. there exists a multiplicative inverse such that where is the multiplicative identity). In an integral domain where such elements may not exist, ''division'' can still be performed on equations of the form or by left or right cancellation, respectively. More generally "division" in the sense of "cancellation" can be done in any ring with the aforementioned cancellation properties. If such a ring is finite, then by an application of the pigeonhole principle, every nonzero element of the ring is invertible, so ''division'' by any nonzero element is possible in such a ring. To learn about when ''algebras'' (in the technical sense) have a division operation, refer to the page on division algebras. In particular Bott periodicity can be used to show that any real normed division algebra must be isomorphic to either the real numbers 'R', the complex numbers 'C', the quaternions 'H', or the octonions 'O'.
Division and calculus
The derivative of the quotient of two functions is given by the quotient rule:
:
There is no general method to integrate the quotient of two functions.
See also
★ Aliquot
★ Division (electronics)
★ Vulgar fraction
★ Multiplicative inverse
★ Inverse element
★ Division by two
★ Long division
★ Quasigroup
★ Group
★ Field
★ Vinculum
External links
★
★ Division on a Japanese abacus selected from Abacus: Mystery of the Bead
★ Chinese Short Division Techniques on a Suan Pan
★ Rules of divisibility
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves
Featured Companies
| Great Time Travel | |
| Sheraton Vancouver Airport Hotel | |
| Optimum 1 Travel | |
| Aquaworld Cancun |
