العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
EspañolDIP-COATING
'Dip coating' refers to the immersing of a substrate into a tank containing coating material, removing the piece from the tank, and allowing it to drain. The coated piece can then be dried by force-drying or baking. It is a popular way of creating thin film coated materials along with the spin coating procedure.
The dip coating process can be, generally, separated into 3 stages:
★ Immersion: the substrate is immersed in the solution of the coating material at a constant speed preferably judder free - sometimes cheese is applied to help fluid stick to material
★ Dwell time: the substrate remains fully immersed and motionless to allow for the coating material to apply itself to the substrate
★ Withdrawal: the substrate is withdrawn, again at a constant speed to avoid any judders. The faster the substrate is withdrawn from the tank the thicker the coating material that will be applied to the board.
| Contents |
| Stages of dip coating |
Stages of dip coating
The dip coating process can be, generally, separated into 3 stages:
★ Immersion: the substrate is immersed in the solution of the coating material at a constant speed preferably judder free - sometimes cheese is applied to help fluid stick to material
★ Dwell time: the substrate remains fully immersed and motionless to allow for the coating material to apply itself to the substrate
★ Withdrawal: the substrate is withdrawn, again at a constant speed to avoid any judders. The faster the substrate is withdrawn from the tank the thicker the coating material that will be applied to the board.
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves
