العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
EspañolCROW-STEPPED GABLE
(Redirected from Crow-step)
A 'Crow-stepped gable' is a stair-step type of design at the top of the triangular gable-end of a building. The top of the parapet wall projects above the roofline and the top of the brick or stone wall is stacked in a step pattern above the roof as a decoration and as a convenient way to finish the brick courses.
Early examples, from the 15th century onward, are found in England, Denmark, Germany, Switzerland, and Sweden. Crow-stepped gables were also used in Scotland as early as the 16th century. [1] Examples of Scottish crow-stepped gable can be seen at Muchalls Castle, Monboddo House and the Stonehaven Tolbooth, all late 16th and early 17th century buildings. Crow-stepped gables are also common on Danish medieval churches.
In the Dutch language, this design is termed 'trapgevel' or "stair-step gable", characteristic of many brick buildings in the Netherlands, Belgium and in Dutch colonial settlements. 19th century examples are found in North America, and the step gable is also a feature of the northern-renaissance revival styles.
Convenient access to the roof ridge motivated the crow-step design, along with the availability of squarish stones to accomplish this form of construction. The access would have been convenient for chimney sweeps and roofers in earlier times, where cranes were non-existent and tall ladders were not common.
With crow steps, the roofing slates (rarely tiles) do not reach the end of the building, so making for a special problem with keeping the roof watertight.[2] Many different schemes are found for overcoming this, some of which are described below. Terms currently used in Scotland are italicised.
★ Slates may be laid to the edge of the crow step, with the last slate raised by a wedge (tilting fillet). Then mortar (lime mortar or cement) would be laid over the edge of the slate to seal the gap. Other solutions involve working with lead.
★ A groove approximately 25 mm (1 inch) deep is cut into the inside edge of the steps. A lead abutment flashing is inserted into this groove, called a chase or a ''raggle''. The lead is laid over the end slate, which is raised by a tilting fillet.
★ Leading is inserted into a raggle, and used to make a trough, or secret gutter, running down the inside edge of the steps. The far edge of the trough is raised over a triangular fillet. Slates are then laid resting on that trough edge and overlapping into the trough, which is open and runs directly down to gutters (roans).
★ Rather than forming a raggle, lead flashings may be placed into the joints between bricks as they are laid.
When lead is to be held into a raggle, small folded lead wedges called ''bats'' are inserted at intervals and hammered in so they expand. The raggle is then sealed with mortar.
Crow steps are frequently made of sandstone, even on buildings otherwise of granite,[3] and it is said that the porous nature of sandstone leads to problems with water penetration. Because of this, crow steps are sometimes capped with lead or (as in the picture, unsuccessfully) sealed with other materials.
There are a number of variations on the basic design. One such structure is Culross Palace built in 1597 which features a veiled woman on the crow steps. Roofs in Scotland are typically steeper than in the rest of the United Kingdom (possibly because it snows more) making for steeper and more step-like steps.
★ Baunachshof, Wertheim am Main, Germany
★ Fetteresso Castle, Scotland
★ Forse House, Latherton
★ Maybole Castle
★ Saint Andrews Tower, Toronto, Canada
★ The Castle, Billings, Montana, USA
★ Torwood Castle, Stirlingshire, Scotland
★ Wickham Court, Bromley, England
The Nuttall Encyclopedia suggests this architectural feature is called 'Corble steps'.[4] However, since it does not give the much more widespread name ''corbie steps'' (from the Scots language ''corbie'': crow) it is likely that this was based on a misreading of lower case "i" as lower case "l". Another term sometimes used is 'craw step'.
1. ''Tolbooths and Townhouses: Civic Architecture in Scotland to 1833'', Tolbooth Museum, Stonehaven
2. C.Michael Hogan, ''History of Muchalls Castle'', Lumina Press, Aberdeen (2005)
3.
★ Tranter, Nigel, ''The Fortified House in Scotland'', Volume IV, pp 167-169, Oliver & Boyd (1962 to 1971)
4. ''The Nuttall Encyclopaedia'', edited by Rev. James Wood, published by Frederick Warne & Company Ltd., London (1900)
★ Cornice
★ Gable
★ Parapet
★ Pediment
★ Roper Gate, an example of the use of crow-stepped gable
Crow-steps on a Scottish baronial building.
A 'Crow-stepped gable' is a stair-step type of design at the top of the triangular gable-end of a building. The top of the parapet wall projects above the roofline and the top of the brick or stone wall is stacked in a step pattern above the roof as a decoration and as a convenient way to finish the brick courses.
Early examples, from the 15th century onward, are found in England, Denmark, Germany, Switzerland, and Sweden. Crow-stepped gables were also used in Scotland as early as the 16th century. [1] Examples of Scottish crow-stepped gable can be seen at Muchalls Castle, Monboddo House and the Stonehaven Tolbooth, all late 16th and early 17th century buildings. Crow-stepped gables are also common on Danish medieval churches.
In the Dutch language, this design is termed 'trapgevel' or "stair-step gable", characteristic of many brick buildings in the Netherlands, Belgium and in Dutch colonial settlements. 19th century examples are found in North America, and the step gable is also a feature of the northern-renaissance revival styles.
| Contents |
| Construction |
| Design variation |
| Worldwide examples |
| Alternative terms |
| References |
| See also |
| External links |
Construction
The crow-stepped gables of Glimmingehus, Scania, Scandinavia's best-preserved medieval manor, built in 1499 by a Danish knight.
Monboddo House with prominent crow-stepped gable
Convenient access to the roof ridge motivated the crow-step design, along with the availability of squarish stones to accomplish this form of construction. The access would have been convenient for chimney sweeps and roofers in earlier times, where cranes were non-existent and tall ladders were not common.
With crow steps, the roofing slates (rarely tiles) do not reach the end of the building, so making for a special problem with keeping the roof watertight.[2] Many different schemes are found for overcoming this, some of which are described below. Terms currently used in Scotland are italicised.
★ Slates may be laid to the edge of the crow step, with the last slate raised by a wedge (tilting fillet). Then mortar (lime mortar or cement) would be laid over the edge of the slate to seal the gap. Other solutions involve working with lead.
★ A groove approximately 25 mm (1 inch) deep is cut into the inside edge of the steps. A lead abutment flashing is inserted into this groove, called a chase or a ''raggle''. The lead is laid over the end slate, which is raised by a tilting fillet.
★ Leading is inserted into a raggle, and used to make a trough, or secret gutter, running down the inside edge of the steps. The far edge of the trough is raised over a triangular fillet. Slates are then laid resting on that trough edge and overlapping into the trough, which is open and runs directly down to gutters (roans).
★ Rather than forming a raggle, lead flashings may be placed into the joints between bricks as they are laid.
When lead is to be held into a raggle, small folded lead wedges called ''bats'' are inserted at intervals and hammered in so they expand. The raggle is then sealed with mortar.
Muchalls Castle showing south gable at third floor.
Crow steps are frequently made of sandstone, even on buildings otherwise of granite,[3] and it is said that the porous nature of sandstone leads to problems with water penetration. Because of this, crow steps are sometimes capped with lead or (as in the picture, unsuccessfully) sealed with other materials.
Design variation
There are a number of variations on the basic design. One such structure is Culross Palace built in 1597 which features a veiled woman on the crow steps. Roofs in Scotland are typically steeper than in the rest of the United Kingdom (possibly because it snows more) making for steeper and more step-like steps.
Worldwide examples
Friedrichstadt market in Schleswig-Holstein, Germany
★ Baunachshof, Wertheim am Main, Germany
★ Fetteresso Castle, Scotland
★ Forse House, Latherton
★ Maybole Castle
★ Saint Andrews Tower, Toronto, Canada
★ The Castle, Billings, Montana, USA
★ Torwood Castle, Stirlingshire, Scotland
★ Wickham Court, Bromley, England
Alternative terms
The Nuttall Encyclopedia suggests this architectural feature is called 'Corble steps'.[4] However, since it does not give the much more widespread name ''corbie steps'' (from the Scots language ''corbie'': crow) it is likely that this was based on a misreading of lower case "i" as lower case "l". Another term sometimes used is 'craw step'.
References
1. ''Tolbooths and Townhouses: Civic Architecture in Scotland to 1833'', Tolbooth Museum, Stonehaven
2. C.Michael Hogan, ''History of Muchalls Castle'', Lumina Press, Aberdeen (2005)
3.
★ Tranter, Nigel, ''The Fortified House in Scotland'', Volume IV, pp 167-169, Oliver & Boyd (1962 to 1971)
4. ''The Nuttall Encyclopaedia'', edited by Rev. James Wood, published by Frederick Warne & Company Ltd., London (1900)
See also
★ Cornice
★ Gable
★ Parapet
★ Pediment
External links
★ Roper Gate, an example of the use of crow-stepped gable
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves
