العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
EspañolCAPTURE EFFECT
In telecommunication, the 'capture effect', or 'FM capture effect', is a phenomenon associated with FM reception in which only the stronger of two signals at, or near, the same frequency will be demodulated.
The capture effect is defined as the complete suppression of the weaker signal at the receiver limiter (if it has one) where the weaker signal is not amplified, but attenuated. When both signals are nearly equal in strength, or are fading independently, the receiver may switch from one to the other.
Amplitude Modulation, or AM radio, transmission is not subject to this effect. This is one reason that the aviation industry, and others, have chosen to use AM for communications rather than FM, allowing multiple signals to be broadcast on the same channel.
For digital modulation schemes it has been shown that for properly implemented OOK/ASK systems, co-channel rejection can be better than for FSK systems.
Source: from Federal Standard 1037C and from MIL-STD-188
The capture effect is defined as the complete suppression of the weaker signal at the receiver limiter (if it has one) where the weaker signal is not amplified, but attenuated. When both signals are nearly equal in strength, or are fading independently, the receiver may switch from one to the other.
Amplitude Modulation, or AM radio, transmission is not subject to this effect. This is one reason that the aviation industry, and others, have chosen to use AM for communications rather than FM, allowing multiple signals to be broadcast on the same channel.
For digital modulation schemes it has been shown that for properly implemented OOK/ASK systems, co-channel rejection can be better than for FSK systems.
| Contents |
| Notes and References |
Notes and References
Source: from Federal Standard 1037C and from MIL-STD-188
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves
